Download flyer here
• Slightly roughen the surface with an abrasive. Remove any paint and clean surfaces with Acetone for best results. Ensure surface is dry and free from grease, dust and other contaminants. • If repairing a breakage, apply minimal Q Bond Ultra High Bond adhesive and clamp together firmly for a few seconds. Once bond is achieved, apply the reinforcing powder to the repair area. Once powder is in position, apply liberal amounts of Q Bond Ultra High Bond liquid adhesive to the powder. Within a few seconds a visible chemical reaction occurs and the repair is complete. Additional reinforcing powder can be immediately applied using the same procedure. • If filling holes or large cracks, it may be necessary to use packaging tape or similar to cover the underside of the hole or crack to enable filling powder to be in position prior to applying the Q Bond Ultra High Bond adhesive to the reinforcing powder. • Sand or file repaired area as necessary. • Maximum strength achieved after 12 hours. • Clean up with acetone • Ideal for: metals, ceramics, woods, most plastics – (not polyethylene or polypropylene), natural and synthetic rubbers and leathers. Not recommended for use on paper, plastics with an oily/waxy appearance; eg: polyethylene, polypropylene or Teflon. Will not permanently bond glass or materials containing a high alkaline content.